VW Vintage Rides

brazilla forsale 20000 euro´s

2011-11-02T00:22:00.001-07:00

its forsale because it bougth a 356 coupe

this also maybe on the way to me porsche Pre A 1953 :)))))

2011-06-23T05:58:00.000-07:00

new update on the 1969 leaving wagenwest in oregon

2011-06-23T05:52:00.000-07:00

1969 deluxe red bus

2011-06-15T05:49:00.000-07:00

This is my new bus i bougth from Nate the owner from Wagenwest in the us... its a nice 1969 deluxe red bus runs and drives well with a 1600 cc type one air cooled engine, fresh brakes and Wagenswest suspension. 4inch narrowed adjustable ball joint beam, 2.5 dropped spindles and 4.5 drop plates in the rear. New Empi sprint-star wheels and tires 165-45-15 in front and 195-60-15 in the rear. The paint is a decent match and a 20 year old re-spray that we cut and buffed for 2 days after that we added some new Wolfsburg west stainless steel deluxe trim... no its on its way to vw isp west to get new headliner and new doors panels

new 2332ccm engine comming home soon,,,

2011-04-19T23:28:00.000-07:00

new 2332ccm engine comming home soon,,, ,, should be around 180hp :)))

Karmann ghia tc type 145

2011-04-19T23:26:00.000-07:00

i sold the car about 1 year ago but bougth it back agian. My freind havent had the time to put it together so thats why i thougth WHY NOT , its a super cool car and also rare.. Yesterday i put on the hatch and fronthood and doors ,,, i will keep up the update on this,,, ps its forsale for 13000euro´s as it is now but will keep raising as the project gets futher:))

my 1964 bus with 90%org paint

2010-09-13T02:15:00.000-07:00

bougth this from brian in the US and are looking forward to see it live the 20 oct in denmark.... it has got alot tlc in the suspension , narrowed beam from franklin and drop spindles and narrowed rear with 2 inch and tubing ect ect.... the bus is forsale 20000usd

update on my tc project...

2010-03-19T02:40:00.000-07:00

i got some rust made and strip the car down and got it ready to the painter:))) i choose the org.vw type 1 split bug color L51 from the 1948-1951... i no that in the picture it look like purpel but it was taken with my mobil phone :))))

i will update as time goes along

my karmann ghia tc brazil super rare

2009-12-22T12:31:00.000-08:00

this is my super rare tc ghia.. only made in 18000... the car has only 65000km from new... this is the look i am going for... ps it is forsale 20000usd

new 2332ccm engine start up

2009-11-12T13:09:00.000-08:00

R.I.P MJ... One of the most beautyfull songs :((((

2009-07-08T10:24:00.000-07:00

http://www.youtube.com/watch?v=KSmOauBdpRA

whoooo my westy slamfalia 1971 in vw camper mag:)))

2009-07-06T07:55:00.000-07:00

notch just go new 17inch fuchs detail

2009-07-06T07:54:00.001-07:00

just finish my cosmic :))

2009-07-01T14:22:00.000-07:00

just finish my cosmic :)) and yes they are for sale price 2600euro´s for 6 yes 6 cosmic in 5,5x15

bus maybe going in twotone look???

2009-06-30T06:06:00.001-07:00

super cool retro band from germany

2009-06-30T06:02:00.000-07:00

http://www.thebaseballs.com/

http://www.youtube.com/watch?v=DM2177pHMT0

update on my bus project

2009-06-28T09:34:00.000-07:00

just bougth my old 1962 N model notch back back agian:))

2009-06-21T01:03:00.001-07:00

its going to be a total rebuild and its going to be something else,, with 2733ccm and some other cool stuff as type 1 frontbeam and nice wheels and porshce brakes ect ect...

here are a pic how it looks now and it was don about 8years ago

a little update on my bus and new wheels for it

2009-06-03T06:27:00.000-07:00

a little update on my bus and new wheels for it

just pickup the bus from metal guy :)))))

2009-03-07T08:50:00.000-08:00

my ex panel got new live as famile bus

2009-03-03T02:04:00.000-08:00

my ex panel got new live as famile bus.... many will ask me WHY,,,, but the bus was already cut up on the driver side were it had camper windows some time ago but was repaired very BAD... before the bus was ship to denmark from the us i bougth a complete windows section from vw isp west in cali,,,(my good freind alex and co.) so after alot of thinking i went to the idea that i would like to do it as a 1957 model with press bumpers and smaller rear ligths from year 55-57, and put on wings on the side and make the rear hatch with break ligth in the mittel.... it is almost ready to be paintet and i am going for the beige brown and brown (barndoor and early 55 paint codes)

home sweet home :))) Thanks T2D (paul & crew)

2009-02-15T10:30:00.000-08:00

1 day to go and it will be at my place

2009-02-14T09:15:00.000-08:00

boing

its ready to come home to me now :))))

2009-02-06T03:51:00.001-08:00

its ready to come home to me now after the last photo shoot by the volksworld mag yesterday :))))

my freinds engine

2009-02-05T12:43:00.000-08:00

my freinds engine

fresh update and only a few things missing

2009-01-21T04:53:00.000-08:00

almost there

2009-01-06T02:03:00.000-08:00

almost there .. the hole crew at T2D incl paul :))) have been working hard to get it finish also for the feature in wolksworld mag.

my seats are back from the trimmer

2008-12-30T10:15:00.000-08:00

seats are back from the trimmer to be install in the bay soon :))))

my bay getting close to finish

2008-12-24T04:41:00.001-08:00

my new 1971 westy

2008-12-19T05:56:00.000-08:00

my new 1971 westy. is almost done at TD2 in the UK.. it has got a lot of new stuff , new narrowed link pin beam with drop spindles ,converted to porsche pattern and frame notch front and rear to go low, new fuchs wheels detail , new type 1 irs pro street conversion, new lower paint ligth grey and org white top, new trim seats in red/black pipping, new deluxe trim, new front windscreen, new steering box, ect ect.. the look i am going after is this in the pic...

engine finish and started up :)))))

2008-12-10T23:39:00.000-08:00

check your flywheel :(((((

2008-12-07T01:13:00.000-08:00

here is what my freind john the owner of Powerhouse in the us wrote to me yesterday...

Hello Thomas,
I have a small problem holding me up, when I sent your engine parts to the balancer, I did not have a flywheel at the time, so he balanced all the rest of your rotating parts so I can do the assembly, I went to put the engine on the start up stand yesterday and found that I never balanced the clutch and flywheel yet, so I went this morning over to the my balancer, and we tried to balance your flywheel, I have been having issues with the flywheels being out of balance with a major wobble in them, we have been trying different suppliers all year long and doing extra work on the dowel pin area to get them to sit flat, it seems as though the last 2 flywheels I have tried to use on your engine have been way out of balance, check out the video of the flywheel wobble I have attached. I will pick up a couple more flywheels from scat on Monday and get this fixed.
The odd thing about this problem is that I have not heard of anyone else having this problem, maybe it is they just never even balance there engines, I get about 3 out of 10 flywheels that I cannot use, anyway, I will get this worked out, let me know if you can see the wobble on the balancer, because I will be sending these video clips to Empi, Scat, and other misc. vendors I get these flywheels from.
The crankshaft in the video is just the one we use to balance all of our flywheels, we balance each crank by itself to zero, and each clutch and flywheel to a zero crank, so that if you ever need to change a clutch plate, you can pull of your flywheel and send it to balance with your new clutch.
Sorry for the delay, but as you can see, if it is not right, I won't use it.
Have a good weekend..................................................................................................................................................................

engine finish :))))

2008-12-05T06:11:00.000-08:00

2332 almost finish

2008-12-01T11:48:00.001-08:00

panel on the way to harbour/ airride pic

2008-11-20T06:19:00.001-08:00

nice to see it leaving to the harbour and will be in europe in jan... :))))

just got me org cal parts wheels to fit my panel

2008-10-21T09:05:00.001-07:00

my airride panel 1958

2008-10-16T23:26:00.000-07:00

all work to now has been made by a freind of mine Rudy from mexico... love this cool van

My speedster carrera 356

2008-10-09T13:47:00.000-07:00

this is my replica 356 speedster that i build to look like a carrera and at the same time a early 1955 model with small rear ligths and carrera decklid and gauge and ect ect... the car has gone thru a complet rebuild in new color Chester brown and with leather beige seats and doorpanels and handmade canvas top in beige and new carpets in tan beige, the wheels are the new model 901 with hearts and look like deep disc in the size 7x17 and ET 40

2332ccm startup

2008-10-07T03:02:00.000-07:00

this is on the way to denmark 1963 camper

2008-10-01T00:27:00.000-07:00

the car has lived all its live in sunny cali.. no rust but som bumps here and there.. the car is forsale . for price contact me Tmm@cool.dk

ps can also be delivered with narrowed beam and drop spindles and straigth axel kit and new freeway flyer gearbox....

my 23 samba bus almost done

2008-08-15T01:34:00.000-07:00

did some work this weekend, change the rear drums from late baywindow 5x130 to early baywindow drums 5x205.. I made a deal with my freind jesper(danborn) that just got his 1969 early bay . and he was changing the rear to 5x130 and we just made the switch. good for me and good for him no money out of pucket :))) also got the look rigth this time with the org sprintstars... also my freind that help me from the start on the project, put in the hatch handel that was missing from the start because the old look was custom/clean look at was made to open from the engine room not the best way to open rear hatch :((( so made back to org. no damage was made by drilling or inst. the handle:)))

seats back from the trimmer think it looks nice

I began my project 6 months ago , i did almost all the work myself but had a nice freind that help me from the start to now where its only missing some small things..

The bus has all new parts ect. rack an pinon from creative and narrowed beam/drop spindles from TD2 , new went breaks from CSP+many other nice parts..

The bus was build in late 90´s with a cutom paint job/work such as samba roof clip/rear end from 1958 bus and bumpers everything made by metal guru Morten Hammerbus .. and many other nice items , complet rear suspension from late baywindow, but i though it was time to move on in a more org. way/colors Palm green and sand green..

First i was going for porsche fuchs wheels and went on to gasburner to reach more race look, but in the final end i am going for the org, 4½ and 5½ sprintstars (ps not showen in the pictures but will soon be add to this site.

ghia 1964

2008-08-13T23:33:00.001-07:00